Question about U8147-900 WindTunnel V2 Bagless Upright Cyclonic Vacuum
...brush will not turn and I cannot find where a belt would go. Please help. Either the brush rolls are bad, ends are bad, or the gear housing/motor asm. is bad and will have to be replaced. Mine was ...
wont turn ? its suppose to be beltless what do i do to fix this Are you sure it is beltless? What model do you have? Looking at another manual there may be a seperate on off switch for the brushes but
Question about F7220900 SteamVac V2 Upright Vacuum
...a Hoover V2 Windtunnel and the brushes are not turning. I have removed the black plate, removed the 4 brushes, now what? check for hair / fibre lodged in machine and brushes, remove it then ...
brush will not turn brushes will not turn, No belt on this model. Cleaned the rollers the best I could. We have pets. Brushes will still not turn. Check MICROSWITCH Part Number:28218050 Check and ...
Question about U8122-900 WindTunnel V2 Bagged Upright Vacuum
Hoover V2 Windtunnel? Does a right and left go on the right side and vice versa on the left side? That is how it orignally came? Or do I put both rights on the right and both lefts on the left? Thanks
Question about V2 U8140-900 WindTunnel Upright Vacuum
...Hoover Windtunnel V2 12 AMP, Bagless, Model U8140-900 check the belt it may be stretched or broken...also carpet and hair or other debris around the bruches may have it in a bind,,..remove the 2 ...
Question about U8147-900 WindTunnel V2 Bagless Upright Cyclonic Vacuum
the beater brush on my Hoover windtunnel model u8174-900 won't revolve. The belt looks OK. How can I fix this problem? help wont pickup blows out
Question about U8147-900 WindTunnel V2 Bagless Upright Cyclonic Vacuum
...brush also will not turn unless the handle is released and tilted back. This model of Hoover has a gear drive to turn the brushes. This was VERY prone to problems, and Hoover discontinued making ...
why won't my brushes turn why won't my brushes turn most likely stripped gears on the end of the brushes. (beltless model?)
Question about WindTunnel V2 U8148-900 Upright Vacuum
...brush bars won't turn. Now what? Any suggesti shoestring got caught in brush bars on my hoover windtunnel V2. I took it apart to remove the string. I have put everything back correctly but the ...
Usually answered in minutes!
1,132 Questions
1,137 Questions
870 Questions
836 Questions