needle clamp assembly. There should be a J shaped part which goes into a hole on the bottom of the assembly. Reassemble everything,put the assembly back on the needle bar and tighten the screw with an
needle clamp won't attach to needle bar I was sewing heavy material for a ferret bed and talking to my daughter when the needle jammed, came down on the needle clamp,bent the thread guide.When I tried
Needle clamp fell off needle bar The same thing happened to me! Screw it back in after replacing the needle.
...and now I need additional ones. I have the Brother XL-5130. What needle should I get? I am just sewing regular fabrics for pillows. for regular fabric you'll be fine from 11-14 (14 is regular
Question about XL-5130 Mechanical Sewing Machine
...left hand side click on brother parts go down till you find your model number there is a brother xl 5130 it's close to the bottom of the page please rate this with the thumbs in upper right hand ...
Question about XL-5130 Mechanical Sewing Machine
needle clamp of my brother machine model xr 52 fell of can't fix can find only one screw does it need on go to www.sewingpartsonline.com and they will have your part. Or call Brother at 1-877-276-8437
Question about XL-5130 Mechanical Sewing Machine
what is the part that holds the sewing needle. the needle clamp & needle clamp screw
I need a needle clamp with screw for brother Xl 5130. do you know wherre to find it? check with these websites sewingpartsonline.com sewvacdoctor.com sewforless.com
brother xl-6562 needle and assembly won't stay on needle bar. I was sewing on a heavy fabric and the needle assembly came off. Check the clamp for a crack it sounds like it may have been ...
Question about XL-5130 Mechanical Sewing Machine
...the needle clamp and screwed the needle in but how do I secure the thread guide. did it shear off? Slide it onto the needle clamp from the bottom before you attach the needle clamp to the needle
Usually answered in minutes!
760 Questions
764 Questions
564 Questions
565 Questions
372 Questions