...typewriter it performs well, but will not print any letters. This may have several causes, is the ribbon advancing? is the hammer reacting? is the hammer mechanism forward in the proper position? is ...
Brother ML300 Typewriter The hammer mechanism is staying on the daisy wheel and it won't change letters. Is the hammer striking the paper? What letters print when you press a key? Can you determine if
brother typewriter correctronic gx-6750...prints gibberish. Make certain the printwheel is latched fully into position. Observe the hammer movement while typing slowly NnNnNn. If the hammer does not ...
...brother ml300 typwriter came off and i don't know how to put it back on I assume by "flywheel", you are referring to the "printwheel" which is removable from the typewriter by unlatching the print ...
brother gx-6750 is typing incorrect numbers and letters. how do i fix? Removed and reinstall the Daisywheel. Inspect the ribbon and lift-off tape to eliminate interfering with Daisywheel spinning. ...
...Brother typewriter, and for some reason the "9", "n" and "v" are printing as double vertical lines The lines are the hammer face you have a bad printwheel. DickyO Check ...
Question about GX-6750 Typewriter
brother ax-250 electronic typewriter doesn't move at all but everything else works fine, how do i fix the hammer? the hammer for my brother ax-250 electronic typewriter doesn't move at all
Question about EM-430 Typewriter
...the print wheel). If it doesn't, turn off the typewriter, and squirt a small amount of denatured alcohol on the hammer and try to move it in and out, (carefully!). Sometimes they gum up and
Question about ML-300 Typewriter
...Brother ML300 will not type anything on the paper, please help! I would check all the basic stuff first. Is the print wheel locked into position? Is the platen all the way forward? (lever right side) ...
Question about GX-6750 Typewriter
why is the hammer on my brother will not print any words on the paper Because it is ancient technology. No one uses Typewriter these days! The 'hammer' is a solenoid and has probably failed with age.
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions