Questions & Answers for: brother sewing machine hard turn

Brother 2001 sewing and embroidery machine. I have a brother 2001 sewing and embroidery machine, that locked up after the warning the safety device was activated. Shutting the machine off did not ...

...Brother SE-270D sewing machine I have a Brother SE-270D sewing machine and I keep getting the error message "THE SAFETY DEVICE HAS BEEN ACTICATED" The machine does not beep at me, just shows that ...

Brother LS1217 A friend gave me her LS1217, hardly used, and the instructions are missing. Anyone have instructions on oiling the machine? The fly wheel is very tight. Thanks! oil all moving parts and

...Brother XL-3030 sewing machine. The needle will work if I turn it by hand, but it is "tight" and hard to turn. When I try it with the foot pedal, the motor spins and the needle doesn't ...

brother overlock sewing machine the hand wheel hard to turn how can we fix this most of the time when the hand wheel is hard to turn, it needs to be serviced, to see if it needs cleaning or if there ...

hard to turn withwheel on pe770 mechine is sewing it stops . I raise the foot to rethread needle , it is hard to tun wheel to raise needle It's bound up with broken threads.. clean the bobbin area

...brother xr7700 E6 means the machine is seizing somewhere and the motor is working too hard to turn the hard-to-turn machine. Get is serviced before it seized completely and the cost of repair goes ...

brother sewing machine cs6000 hand wheel hard to turn by hand nothing before you race the machine into a service centre, most hard to turn problems are from thread and fluff wound around the bobbin ...

I have brother sewing machine. but hand wheel is too tight. It is hard to turn in. Put oil and left it for 12 hrs after that you can use alien key to fix the problem

...brother sewing machine how do i open it up to see whats the problem Force it hard by hand in the direction it is supposed to turn. Don't be frightened, it will free up. Then run it full power with no ...