...jam in this brother printer and can't seem to find where it is or access it. PLEASE HELP we need contracts printed asap! paper jams alway in the same spot- just as it's about to exit the bottom ...
Brother HL-2140 printer I have a paper jam in my printer (model HL-2140) and I cannot see any way of freeing the jammed paper. Very frustrating! I have the same problem - try what it says at this link
Question about Brother MFC-290C Printer
i have a paper jam...how do i clear the paper jam? I would always just look for the paper to get out. Some printers lift up to the area where the paper slides througha nd you can pull it out just like
Question about HL-2040 Laser Printer
...Brother HL-2040. Hi, Sounds like a paper jam. There's a flap at the back of the printer-once open you should be able to see if the paper is stuck there. (Exactly the problem I had yesterday-I didn't ...
Question about HL4040CN Laser Printer
...3 1/2 inches apart down the left hand side of the paper I get these only when printing with color mode at auto Spots along left margin spaced vertically about 3 inches apart: Brother HL-4040CN ...
...spots. Then, the printer puts a sheet of paper in contact with the drum, and the ink is transferred to the paper. Then, the "fuser" heats the paper & ink, and "melts" the ink into the paper. So, ...
Question about HL-5240 Laser Printer
Why is there black spots on the edge of the paper when printing Everytime we print there is a black spot on each paper...how do we fix this? Change drum or wiper blade
Question about Dr420 Black Drum Unit Cartridge
...Brother Printer print quality problems, Then I suggest You clean the Your Brother printer drum unit as follows: Small Spots on the printed pages: If your printed document has any small white or ...
brother 2170 spots on paper there are a lot of reasons that causes spots on every copy. these are some.. 1. The drum is already old and has spots on it - replace 2. The toner cartridge is almost empty
Question about HL-2170W Laser Printer
...Brother HL-4150CDN Printer Black spots are toner accumulated at TONER COMPARTMENT , FUSER OR BOUTH. USE A VACUM CLEANNER PROTECT THE LASER GLASS W/ PAPER AND SPRAY AIR W/ AIR CAN. MUS BE
Usually answered in minutes!