Questions & Answers for: brother printer blinking green ready

...printer only prints half a page, or one page out of a 3-page print job. The green ready light blinks, and when the go button is pressed, another half-page will print. It seems like the memory is ...

...Brother printer. Hey presto! Good luck, Will I was printing labels. The red light would instantlty come on with the blinking amber paper light as soon as I clicked print. All my problems were fixed ...

blinking at the same time when I try to print a document from my Word Perfect program. Nothing prints. This only happens in Word Perfect. What can I do to solve this issue. Thanks! Mimi mbl70435@yahoo

Brother HL-2040 will not print. After refilling the paper supply, my printer stopped printing. Has just the standard green ready light ( which blinks as I send a print job). Nothing from a print test

green ready light with a blinking red alarm light. will not print. This is a paper jam error. Try reloading the paer if you can not find any paper stuck inside the printer. Then press the start button

Brother 1240 drum and ready lights stay on, will not print. The drum light is yellow, and the ready light is green. They are not blinking. This printer has an on/off switch (on the left side near the ...

...Brother HL-1440 Laser printer is not printing. Whenever I try to print something there is a sound coming from the printer with a high tone, then a low tone. This is the first time I have experienced ...

...green and the printer sounds like it wants to work. Then the lights go back red and nothing happens. When I open the door to the space where the toner cartridge is and then shut the door, the lights ...

...brother HL-2040 wont print and the green ready light is blinking but nothing is happening Have you tried pressing the GO button to reset the device? I had a similar problem, found this manual and it ...

Brother off 2. Open the front cover of the printer 3. Press and hold Go and turn power on. Do not let the button go. 4. When all 3 lights light up, release the Go button. 5. Press the Go button twice