Brother CS-80 will not always thread the needle when I depress the thread cannister. I get this problem too. I found that it might be because I've moved the wheel while sewing previously and the ...
Question about CS-8150 Computerized Sewing Machine
...threader down (on the outside of machine - by needle). 3. While pulling it down, keep an eye on the inside. You should see and hear something click as you pull it down. 4. Now you can let go of ...
needle threader, or another type of needle changer i can use for my serger, I would appreciate it. Thanks so much! Brenda I agree it can be tricky. The paper over the feed dogs is a good trick.&
Question about Disney PE-180D Computerized Sewing Machine
...needle threader go down low enough to meet the hole in the needle? Try raising the needle so the threader does not have to go so low. The owner's manual should have instructions on what height the ...
Usually answered in minutes!
760 Questions
764 Questions
564 Questions
565 Questions
372 Questions