Questions & Answers for: brother hl 5240 drum reset

Brother HL-5240 drum light flashing Hi Drum light was flashing on this printer, so I replaced the drum for another(original Brother DR-3100). Followed steps to reset the Drum counter. However when I ...

...of the page and its very faint. It was printing fine before I changed the drum unit. It is an oem drum unit bought from Brother. you need to clean laser but first try to change drum and toner ...

...Brother HL-1440 lights are indicated "Main Motor Malfunction". Lights alternate between Drum light and all 4 lights blinking. Any reset possiblities or am I dead? Mine had the 4 led's blinking ...

...reset it like we do with the drum, but the toner light will still not stop blinking. Please help Nadine Take the drum/toner out and with the front cover open press the blue 'go' button once, then put ...

...Brother HL 5240) and I replaced the drum with a new one and it still will not work... Any suggestions? I continued looking and found where someone else had the same problem. I opened the front cover, ...

...Brother HL-5240 wont recognise a full paper tray and so the paper led light wont stop flashing. There is full toner and a new drum. I have tried holding down the 'go' button with the cover open to ...

...Brother HL-5240 Out with the old and in with the new, you remove the toner and drum together, remove the toner from the old drum by pressing the blue lever on the side, install the toner in the new ...

reset the drum counter? Drum reset procedure: Open toner door, hold down go button until all lights are on, let go of button, close door, push go button. Will reset drum counter to 100%. Good Luck and

...HL-5240. How is this done? Drum reset procedure on this model is quite simple. Just open front door, hold down the GO button until all lights are on, let go of button then close door. This will reset ...

...Brother HL 5240 printer and it still won't print. Try to reset the Drum. Open toner door and hold down the go button until all lights are on, let go of button, close door, push go button. Resets drum ...