Questions & Answers for: brother hl 2040 reset drum

...HL-2070NR http://www.tonerovernight.com totally worked you guys are amazing i have the same problem at the moment i have been holding down the go button to reset the printer it seems to work for a ...

HL-2040 CHANGE TONER I CHANGE THE TONER AND DRUM - AND STILL SHOW THE TONER LIGHT AND I CAN'T PRINT. I FOLLOW ALL THE INSTRUCTION, AM USING THE BRAND NAME TONER AND DRUM. Reset the drum counter by ...

Reset the Drum counter as follows: Open the front cover. Locate the control panel button under the LED lights on the left side. Press the control panel button until all lights are lit, then release it

...Hl 2040 printer The drum light was blinking so have decided to replace with new drum, have put in an original new one as HP not one of these enviro things and the drum light still kepps flashing. I ...

HL-2040 Brother Drum light is on, I changed the Drum and it is STILL on, any ideas? Open the front cover. Locate the control panel button under the LED lights on the left side. Press the control panel

Brother HL 2040 How do u reset the counter on the printer brother HL 2040 if you want to install a Drum from another machine? wecan reset brother cartage 2ways. when we are filling at that time we can

...not print The printer was fine. Suddenly, the drum light started blinking. I changed the cartridge... no luck! reset the drum counter .. you can keep using the old drum as it will reset the ...

...Brother HL-2040 Hi. Have you recently replaced the drum? The Drum LED blinks if the drum unit is near the end of its life. Use the drum unit until you have a print quality problem, then replace the ...

...Brother HL 2040. I placed a remanufactured drum and toner into it. The Drum light keeps going on. From various sources on the internet, I learned that I am supposed to reset the white counter on the ...

...HL-2040 printer. But the LED light shown orange. Can I know how I going to do reset for the new drum. Thanks! The Drum LED continues to blink if the drum counter was not reset when you replaced the ...