...area. Little black levers that flip and trip a sensor. Make sure they are all moving freely. There is one or two in the doc feed area. One inside the paper feed area. One or two in the ribbon
...error messge, we can't get receipts There is either a jam in there somewhere where you can't see it, or if it clears, the feed roller is not feeding the paper, in either case you probably need a
...goes through. The additional pages will not feed through or they pull through crooked. I have to send each page individually. look for a piece of paper in the paper path. clean all paper feed ...
...PAPER FEED ROLLER THAT NEEDS TO BE REPLACED THE TOP HALF OF THE FEEDER MUCT COME OFFF TO DO THIS OR YOU MAY HAVE A SENSOR OUT OF WACK WHICH IS UNDER THE FEEDER. IF YOU ARE GOOD WITH HANDS YOU WILL ...
paper error We have a Brother Intellifax 1270 and we keep getting the message "paper error". We have paper in the machine and at one point when the paper did start feeding through, it got stuck in the
The copy/receiving function will not work. The paper in the paper tray is not pulled in so cannot print incoming faxes or make copies. hi,clean feed roll if the feed roll out of use please replace it.
Question about IntelliFAX 1270E Plain Paper Fax
...paper" error I open the paper feed area, remove and put back paper and works fine for one page again until error message comes up. chack the scaner some paper dust is thear & clean the scaner ...
Question about IntelliFAX 1270E Plain Paper Fax
...1270e. How do I fix this? You have not specified why you can't read the right side of copies and I am assuming that the reason is because the 'lines' are covering the text. I can offer a solution to ...
Question about IntelliFAX 1270E Plain Paper Fax
...feed it through the paper path; this should hopefully clear any debris that is blocking the jam sensor in that area. Also, try spraying some canned air into the paper path, as if there is dust ...
...paper don't feed, you need to clean the paper path the roller that guide the paper to pass under the the scanner must be cleaned with alcohol. you need to unplug the fax from the power source. after ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions