Questions & Answers for: bronco stuck 4x4

...BRONCO NOT SURE IF 4X4 IS INGAGING YOU CAN HEAR THE MOTOR INGAGE BUT I WAS STUCK IN THE SNOW AND THE FRONT WHEELS DONT SPIN IT IS A PUSH BUTTON 4 HIGH 4 LOW BOTH DO THE SAME THING FRONT WHEELS DONT ...

Ad

Question about 1988 Bronco II

1 Answer

...Bronco II 4x4 and am trying to remove the front drive-shaft. My Haynes repair manual is no help as to what bolts to take off the shaft. It also seems that no Standard or Metric wrench fits any of the ...

Ad

...Bronco 4x4 does not engage. Rear passenger tire spins and all others are stationary. I got stuck in some gravel mixed with sand yesterday, which ive gotten out of before with no problems. But as i ...

Bronco and I am Having trouble with my four wheel drive. I have a violent popping noise from the front. It starts popping when i give it the gas and/or when i turn sharp. I have replaced all the front

1990 ford bronco II stuck in 4 low with 4x4 light flickering have major problems with the electric motor assy on side of transaxle.. need a manual for testing and replacing

Question about 1990 Bronco

2 Answers

...4x4 is stuck in four wheel low it is shift on the fly and i have already replaced the transfer case motor Ok here is a long shot but sometimes it will work. Put the 4wd position switch to 4wd Lo, put ...

bronco II. Push button 4wd isn't working and I can't find the fuse (inline) to check if it's blown. Engage the 4wd and go underneath and tap the 4x4 motor to engage it, it is probably just stuck. More

stuck in 4 wheel drive. I dont have front drive shaft in. That is possible. First lets make sure that it is not in four wheel drive. Not all 4x4 vehicles are built the same. My Bronco goes from 2wd to

...Bronco in 1996. Is it stuck in 4 high or 4 low? Do you have a manual shifter or a push button? If you have an automatic electric system you may have a bad transfer case motor or switch. If you have ...

stuck with electric switch 1988 ford bronco 2 will not disengage 4x4 try this ... make sure the switch is in the 4X4 position ... drive a few feet (20-50) while moving slip the truck into neutral then

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...