Questions & Answers for: broken wire gm tilt

...broken under the plastic housing and would like to do it myself. it could be the wiring rattled loose or a nut or a screw has come loose inside the steering column, you might be able to get at it by ...

gm columns have problems with broken wires that run through the column .From tilting the column up and down . sometimes you can wiggle your steering wheel up and down while turning the ignition .If it

...working. Could be the switch,dirt or a broken/loose wire. there's a lot of wiring going through the column and a lot of movement ( turn signal,high beam,cruise, then add tilt) Hope this

wire that runs to the button on the shifter. One of those wires are probably broken. Very common problem on these trucks. You can solder and heat shrink it or use a butconnector. Doesn't take too long