Questions & Answers for: broken push button door latch

...push the button tab you can see something moving. I'm assumming this is the piece that releases the latch and opens the door. These slots on the top and bottom where the latches fit do not look the ...

...push the button, I have to actually pull on the door to get it to release & open. I don't see anything broken or out of place. This unit is just over a year old and has been given TLC. Any ideas ...

...door on Sharp R-5H84 microwave . Push button and can pull the door open with a slight amount of force. Sounds like a portion of the release knob is worn or broken, or a metal piece behind it is

...push up on the door latch heads (hook-like devices sticking out of the door) there should be spring tension. If they just flop right up, the spring is off inside. Normally the problem is not the ...

...broken off. The lower hook is actuated by the push lever and in turn lifts the upper latch that of course is not being lifted. Disconnect from the supply. Remove the case from the microwave and you ...

...push button doesn't work One of the latches has broken off and is not lifting the dother latch clear of the housing. Remove from any power source, remove the cover of the cabinet. Slacken off the ...

...push button stays in. The light inside stays on. Is there a manual with an exploded view to enable me to troubleshoot this? The door open button may be broken or jamming due to grease deposits. In ...

...push the door latch button on the sharp R-530BS the door will not open you must replace the door latch parts.test the door hooks can be broken. go to www.repairclinic.com and buy it. God bless ...

broken piece back in place enough to shut the door, but then when shut the light comes/stays on inside and the base plate spins but I can't push any buttons to start the cooking/heating. I can put

door will not open on sharp microwave r-530es Push door open button but door will not open The door latch is either loose or broken.