brake pedal goes to floor 1979 camaro..replaced the brake master cylinder and bleed the lines. when car is not running pedal is very firm. when car is running pedal goes to floor easily. when i ...
...pedal goes to floor does brake light come on? assuming brake fluid leval is ok & didnt run empty have you checked for a leak? pulling all wheels & inspecting brakes,cylinders, calipers,& ...
brake pedal soft after changing pads and bleeding brakes front right brake hoes blew out and replaced it and changed pads.Bled brakes all four but pedal is still soft when car is running but gets hard
...brake pedal on 1994 suburban The brake pedal on our 1994 Suburban has suddenly gone to the floor with very little stopping power in the brakes. All brakes look dry, and the master cylinder has plenty ...
...brake system cant bleed trying to blled brakesa after installing new line - still soft this is best way i know is to fill resevoire with fluid open all bleeders up let it start dripping out of them ...
Question about 1998 Bonneville
...brake pedal is to soft when you apply it and seems like is not going to stop but it does, what is the problem? I have brand new brake discs and pads, the car doesn't have leeks on the brake ...
...soft at a stop one day, pedal slowly went to the floor. have bled all brakes and found no air and fluid runs fine. pedal still goes to the floor while car is running. pedal goes hard when car is not ...
Question about 1998 Sunfire
brake pedal went soft and to the floor. While car is running pedal is soft, while off pedal is hard. Have bled all the brakes and found no air in the lines and fluid is 1998 Pontiac Sunfire 4 cylinder
Question about 2005 Envoy
brake pedal is hard when vehicle is not running,but is soft when the 2005GMC Envoy is running.changed the brakes and rotors? This sounds like a vacuum or hydrolic issue. If The pedal is spongy soft ...
Question about 2005 Envoy
...brake pedal is hard when not running and soft when running? This is the usual behavior. When the engine is running, it is generating a vacuum, which pulls on a diaphragm in the brake booster. This is ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions