...brake lights have stopped worrking. I still have the 4way flashers, the brake light on the cab works all fueses are ok bulbs are working. so are the running lights.also when I turn on either turn ...
05 Chevy Silverado No brake lights I have no brake lights, the thrid brake light on the roof works any ideas would be helpful thanks. find your burnt fuze in your fuze box :)
...brake lights only one above rear window and on camper shell I recently had the same issue in my '05 Silverado... I believed it was something more dire, but it turned out that i just needed to replace ...
...05 silverado. In the last year I've replaced the pads 3 times and the rotors once. The most recent set of pads being ceramic at the same time as the rotors, all installed in August. The passenger ...
...lights can burn out at once but when one brake light is on they are all on and for the same amount of time. If the bulbs are fine then check the connection where the trailer plug is to the main ...
...Brake Lights on car? http://schematicsdiagram.blogspot.com/2011/06/how-to-replace-parking-turn-and-brake.html----------Squeak and grinding sound is heard when brakes are applied? ...
Question about 2001 Silverado 1500
...05 chevrolet silverado have abs scencer on them my hub broke and bent my break pads and the braket , i changed my hub roughter pads and braket and abs scenser but the abs light and brake light is ...
Question about 2005 Tahoe
...05 chevy silverado and the brake system warning light stays on and chimes if i drive. Ive checked the fluid level its full, the parking brake seems to be releasing fine to. i dont know what it could ...
Question about 2005 Chevrolet Silverado 1500
...brake lights to stay on in 05 silverado? checked fuses and relays. Getting no codes either. bad or damaged body ground---chaffed/damaged wire or wire harness and bcm-[body control module ] going bad ...
Question about 2005 Chevrolet Silverado 1500
...Brake lights work. I have a 2006 Silverado that rear lamps have recently quit working. A turn lamp and backup lamp on opposing sides. One was from loose socket contacts and the other was oxidation of ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions