Questions & Answers for: brake light sending unit

Question about 1999 Rodeo

2 Answers

...brake light is alwyas on even when brake is disengaged. Has anyone had this problem? What part(s) do I need to replace? My car did the same thing, mine was the fuel sending unit in the tank. Replaced ...

Ad

Question about 2001 Windstar

4 Answers

...brake light is on, then later the abs light comes on, my brakes work fine too..no squeking or anything...wierd, i was gonna take it to Ford and let them look at it, but a nothing issue will cost 500 ...

Ad

Question about 2001 Windstar

2 Answers

brake light on 2001 toyota tundra, I just replaced brakes and light remains on, no air in system and brakes are good. You need to adjust the brake light switch above the brake pedal. Pull the pedal UP

...brake light system and the oil pressure sending unit. trace the wires in the oil press sending unit if it frays with other electrical lines. trace the lines of the brake switch which should be in the ...

Question about 1994 Acclaim

1 Answer

...brake oil light comes on take my foot off brake oil light goes off friday at a light soon as i put my foot on thegas it started to go but then started to shut down oil light came on and engine light ...

Question about 2004 Mercedes Benz S Class

1 Answer

...brake light sending unit. Are your brake lights even working. Many newer vehincles will not shift out of park unless the brake pedal is depressed. However, a faulty sendind unit located on the pedal ...

...brake light sending unit under your pedal link sends a signal to the lamps to come on when you depress the pedal. Something is wrong where the pedal meets the unit. Apparently the switch works or the ...

Question about 1997 Cavalier

1 Answer

...will go forward/backward and that causes a fluctuation in the pressure, which causes the faulty oil sending switch to trigger the oil light. Replace the oil sending unit switch and you will be

Question about 1997 Cavalier

1 Answer

changed fuse/ globes More than likely it is the sending unit that is attached to the brake pedal bar. there should be a little unit that send power to your brake light every time you push on the brake

...brake light sending unit had come out of adjustment.Look under the dash by the brake pedal.There is a plastic threaded unit that needs to be pushed back towards the brake pedal lever.Careful not to ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...