...bulbs and are happy they are serviceable. Therefore you can examine the brake switch input and output (while pedal is depredded)Usually located in the pedal box area of the drivers foot well ! Good ...
...(!) mean when it lights up in Chrysler Sebring 2008 if it is red in color, it means that your brake fluid level is low, so immediately top it up....the brake master cylinder is under the
...light portion of the bulb keeps blowing, brake and signal are fine. Is your lense cracked where water can get into the housing? Are you absolutely certain that you are replacing it with the correct ...
brake pedal, and checked bulbs. bulbs good, also disconected batt for reboot but nothing. where else can i look? check all deaths on the boot and main earths under the battery compartment and the main
...brake light switch-replaced, fuse-checked and good. what else can it be? faulty earth some were. check the main earth wires in the boot. also check the earth wires under the battery
...brake light switch is located on the brake pedal arm under the dashboard. It may be stuck. Remove it and use electric/electronics contact cleaner spray to restore it's action. If the spring is broken ...
Question about 2008 Sebring Convertible
changing a tail light bulb in a 2008 convertible sebring how to replace the taillight bulb in a 2008 convertible sebring inside the trunk
brake light bulbs have done a brake light switch they still will not come on I texted fuse is there another fuse box besides underneath the hood or what else can I do test wiring and sockets "There is
Question about 2008 Sebring
...light. ...
Question about 2008 Sebring
2008 Chrysler Sebring where is the security module located and what is the diagram for pin readouts Good luck with that. The SKIM key module is one and the BCM is the other. ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions