Questions & Answers for: boss amp protect mode

...amp output i have a boss ch3000d and i had it hooked up to two sony 1300 watt 4ohm subs and the amp was killing them so i bought two mdsound 2ohm subs and now im not getting hardly any sound from my ...

...boss amp. Jensen MP6212 car stereo/boss ava 400tr amp. Amp is swapping over to protection mode. Could it be a ground? PLEASE HELP :) Disconnect all the wires and make sure that their all connected to ...

Boss 3500 Watt Monoblock Amp stops putting out signal I have a Boss 3500 watt monoblock amp that works when the car is turned off but as soon as I start the car it stops putting out any sound. The amp

...Boss Amp keeps cuts off when I play the music from my stereo check your ground wire and your remote wire, Wiggle them separately both at the amp and at the ground point. See if it cuts out then, and ...

...amp is in protect mode and probably has shorted output transistors. To eliminate other possible causes, read through the following page: Amp in Protect Mode - Trubleshooting Let me know if you have ...

...boss amp is on protection mode and it wont work its a 3500 watt chaos idk what is wrong with it Likely one of the power amps has failed component(s) and does not achieve electrical balance which then ...

...problem, but this is far less common. Use a capacitor fix the excessive power draw from the amp and sub. See:Capacitors - BOSS AUDIO SYSTEMS Regards. Ginko. Use a high amp alternator not enough

amp going into protect mode Everytime I turn my music up the amp cuts off The first thing I would check is how your speakers are wired to the amp. Multiple speakers wired in series or parallel will ...

...my boss blade amp wen it stock in protection mode You have to troubleshoot to find what caused it to enter protect mode. This can be caused by overdriving the output or failure of related

...Boss mono block amp that is stuck in protection mode and green light is flashing any ideas on how to fix it plz It's a inexpensive amp, and poorly made. the amplifier failed. you won't be able to fix ...