Questions & Answers for: bose 8 pin cable

Ad

Question about Acoustimass 10 III System

1 Answer

Bose Acoustimass 8 pin Cable I bought different part of Bose Acoustimass to make a complete system. The subwoofer has an audio input in the form of a circular 8 pins. I'm not sure if i can use this ...

Ad

Question about 3·2·1 II System

1 Answer

...bose system? If you are then you need to hook a 1/8 mm headphone jack style cable on one end to the headphone jack on computer and on the other end of the cable you need a standard red and white rca ...

Ad

Question about 321GS Series II System

1 Answer

...a video, easy to understand. Call for help: I'd call Bose and make the case 1-800-999-2673 Sales support: Mon. - Sun., 7 AM - 2 AM ET Technical support: Mon. - Fri., 8:30 AM - 9 PM ET Sat., 9 AM - 6 ...

Question about Lifestyle 20 System

1 Answer

Bose jack as follows, left to right, top to bottom 3, 2, 1 - 6, (gap) 5, 4 - 8, 7. Audio comes out at pins 7 and 8. So connect your scope at those points and ground the probe by clipping it to one the

Question about Lifestyle 12 System

1 Answer

BOSE-LIFESTYLE-5-8-9-12-8-PIN-DIN-CABLE-MAIN-SUB-/230591582527?pt=LH_DefaultDomain_0&hash=item35b054513f http://cgi.ebay.com/BOSE-LIFESTYLE-5-8-9-12-MAIN-UNIT-SUB-13-PIN-DIN-CABLE-/160548740302?pt

Question about Acoustimass 10 III System

1 Answer

...cable link (DIN to 8pins RJ45) for Bose PS48 powered subwoofer when moving house. Has anyone got the schematic for the cable pin outs? Please help me out. Thanks Could anyone post 8 pin RJ45 ...

Question about Cinemate Digital Home Theater System Speaker

1 Answer

...Bose amp/speaker systems was to deviate, sometimes drastically, from the 8-ohm speaker driver standard and design the mated amp to work with the selected load. THAT is just two reasons why no specs ...

...8 pin to 9pin adaptor between the bose link b cable and the MRI, I suspect a wiring or switch problem on the amps. How should the switches be set and should I be using a bowse link a cable Use only a ...

Question about Cinemate Digital Home Theater System Speaker

1 Answer

how to solder new cable bose acoustimass 8 pin din get solder iron to low set up on circuit board with silver solder

...8 pin connection of the audio input cable. Is it possible to solder the pin on? No, the harness will tranfer too much heat and will do more harm than good, try a thin nail and retrofit it to touch or ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5686 Answers

The Knight
The Knight

Level 3 Expert

76054 Answers

Marvin
Marvin

Level 3 Expert

84966 Answers

Are you an Audio Players & Recorders Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...