...Bosch washer seems out of balance when spinning, even with no load. With a small load, it seems worse. The washer is only a few months old, but had to be torn apart and rebuilt because a ...
...washer I have a Bosch Nexxt 100 series washer that occasionally does not rinse items thoroughly. This evening, my wife washed a throw, which is similar to a quilted blanket, but much smaller, and, ...
...Bosch, they mentioned something about the petrol cap looking thing at the bottom right of the washer. So i openened it, water came spilling out all over the laundry floor... So after this i tried ...
It will not agitate or spin. Otherwise,the machine works . It goes through all the cycles but tub never turns. Water drains, finish lite goes on; load sits soaked. Last load contained blanket. May ...
Question about Nexxt 100 Series WFMC1001UC Front Load Washer
...bosch washer draining. In the front there was a panel that had a little tube that you uncapped and drained in to a roasting tin as it was close to the floor. Then I had to twist something to the side ...
...bosch washer doesnot spin out when a single sweater is in. the drum turns but not at full speed i have the same problem, what i find helps put a bed sheet in with the sweater to even the load, ( I ...
washer and dryer 30 feet to the garage while I do some remodeling> Hi from retired Englishman in SW France, Just stuff blankets or equivalent inside from the back all the way around the outside
...washer won't spin. I have one light blanket in the machine and it won't spin. I turned the machine to a regular wash cycle to see if the drum would spin and it did. When I turn in back to the spin ...
...washer tub had a very unbalanced load in it (heavy blankets, jeans, or pillows, all piled to one side instead of evenly distributed around the inside of the tub), and it threw it off balance. When it ...
Question about WFMC 3200 Front Load Washer
...Bosch front load washer, Series 8 9kg WAW28420AU and we currently have a blanket in the machine and can't get a cycle to complete itself and get an E00 error code We can start a cycle and mid way it ...
Usually answered in minutes!
9,125 Questions
3,839 Questions
3,158 Questions
2,979 Questions
2,660 Questions