Questions & Answers for: bosch nexxt dryer start stop

Bosch nexxt 500 series dryer My dryer does not heat. It does tumble. Have checked the heater and the reset button. Both are fine. Any ideas? Thanks, Lisa I just had the same problem, motor runs but no

...dryer will not start or turn... The most common causes are the belt breaking or jumping off, or the motor goingbad... Here are a couple of tips that I wrote will help you to figure out why yourdryer ...

...Dryer "start"? Could it be the "start" button? It flashes "lint filter" even after I have cleened the lint filter, the hose in the back and used my leaf blower to blow out any lint in the vent going ...

...Bosch series 500 dryer that has stopped working. when i turn it any program the START/PAUSE light starts Flashing as usual and the time shows up on the the display. when I push START the DRYING led ...

...bosch nexxt electric dryer doesn't click and the dryer will not start. Not sure if this will address the problem but it maybe worth a try. We also had problems with our Nexxt dryer starting. We found ...

...bosch nexxt series dryer, but when depressed it doesn't start the dryer. We have just moved it into a new home. Here is what happened to our nexxt dryer. So this may be the problem with yours. Our ...

...Bosch Nexxt 500 series dryer. Today I was drying my clothes and half way through the dry the machine just stopped spinning. I press start and it just makes a clicking sound but it doesn't spin. Can ...

...nexxt dryer. So this may be the problem with yours. Our dryer is about 6 years old. The start/stop button was not making contact with the mini-switch. Used some hot glue under the lever that makes ...

bosch dryer that is intermittingly not turn on. When it does it works fine. I made sure that the lint filter was clean plus the dryer vents. It seems to me like the start/stop switch. Any sugestions ?

start, dryer clicks like it wants to start but dryer dose not run. The motor tripped..The wiring diagram for the dryer is inside the back cover tie-wrapped to the frame as it sounds like the motor has