Questions & Answers for: bosch nexxt 300 error codes

...bosch Nexxt 300 series washing machine is showing an error code that says E:13. What does this mean? Is it an easy fix? Put the washer on cold and run "TWO" cycles. There is too much soap or fabric ...

im getting an error e 13 message and the door will not unlock error code = bad pump? or just a clogged screen /kinked drain hose? E:13Er:13 test #P:15Drain pump time exceeded,Faulty drain pump, wire ...

Bosch Nexxt 300 Series, because it was leaking with no code and it was a manufacture defect, It is leaking again with no error code just water under the machine. In the front of the machine my husband

...error code on the WFMC series Bosch washer`s refer to a drainage problem, as you may or may not already know. ( or in Bosch terms "pump time exceeded" ) Anyway, here`s the most likely way to remedy a ...

E 27 error code . what does this mean HI THAT MEANS door is locked and will not start PLZ VISIT THIS LINKhttp://laundry.manualsonline.com/support/bosch/washer/error-code-e27-3495138

D19 error code I have checked the fault codes and there does not appear to be a D19 fault, can you confirm fault code and full ENr (from rating plate on machine) pls

Bosch Nexxt 300 series I cleaned out the filter on the front of the pump and it still won't drain. http://applianceguru.com/attachment.php?id=2463 Make sure you click helped, if helped that is

e21 error code E-21 excessive foam: too much detergent or wrong detergent being used. Needs HE stuff in it. Bosch troubleshooting guide

...bosch 300 nexxt series washer? I originally got an E:13 error (suds or pump is blocked). I opened the access panel and cleared the sludge. Pump works fine now. However now the machine will not allow ...

Bosch nexxt 300. How do I correct err 04? If the error code is a F04, then it means that you have a motor fault.