Questions & Answers for: boot cd raid

...boot to cd and cannot detect the hard disk when installing OS, but in IDE settings its okay.. and it works perfect.. after you installed the windows properly, you can change the Hard Disk or cd/dvd ...

...cd/dvd burner pluged in and the hard drives are on software raid 5 that was already on the motherboard, i reasently stuck another hard drive on the last sata port to use seppartly from the raided ...

...boot from the Win XP CD-ROM and add the RAID driver (by pressing F6 during setup), but when it gets to the point where it wants me to select the partition I want to install Windows on it obviously ...

...Boot server using Windows Server 2003 CD The moment you see the blue setup screen press F6 After the setup runs for a little while it will ask you if you have any additional drivers you need to ...

how to bypass raid?I get message boot disk failure, but in bios boot priority is cd/dvd and disc is working ok repair your operation syster by bootable cd .if not work reinstal operating system.

...boot with widows cd at the time starting boot press f6 to specify the scsi drivers then all scsi hdd will detect for installatio. Hello, What type of repair are you in need of for Server 2003? Thanks ...

...boot from cd first, it always seems to boot straight from raid, bypassing cd. in the Bios the first drive seek is cd. but it has a HDD priority above this which is for the raid and i can not get this ...

...boot from CD to install the windows on them and it says "Press any key to Reboot". :((( have you gone into bios (hold "delete" at start-up) to change the boot order and primary boot device ...

...CD-ROM is set to boot first, followed by the Hard Disc. Be sure you have Disc 1 of the Linux installation set in the CD-ROM Drive and reboot. If you don't get the install screen, you may have another ...

...them_______ Booting to the CD requires that in the Boot Up (BIOS) that you have selected the CD as a bootable item - and that there is something to boot TO in the