Questions & Answers for: bolt loosens

...my mazda potege i can't seem to find what holding the alternator in place. i loosen the adjustment bolt but i don't see any other bolt that could be holding it. if you have an adjusting bolt to ...

Below are the steps.. Disconnect the negative battery cable. Remove the two fresh air duct mounting bolts on the radiator. Loosen the fresh air duct clamp at the intake housing. Remove the hose at the

...mazda protege 1.6L (Zm) Engine Refer to the illustration for component location. Loosen mounting bolts A, B and C. Loosen the adjusting bolt D and remove the belt. To install: Installation is the ...

WHAT BOLTS DO I LOOSEN TO GET FAN BELT ON 1992 JEEP CHEROKEE 6 CYLINDER. I HAVE THE BELT ON PRPERLY AROUND THE 1ST 5 PULLEYS. BUT THE UPPER RIGHT PULLEY HAS TO BE LOOSENED IN SOME WAY TO GET BELT ON. ...

how do replace the alternator belt on a kia 2002 sportage There is a log bolt that needs to be loosened,but the bolt on the back ,top of the alternator has to be loosened first,then turn the long ...

how do you change alternator belt on 1997 mazada 626 heres a diagram to help you, loosen the bottom bolt a few turns then loosen the top bolt then loosen adjusting bolt to loosen belt, use the ...

...remove the pully first but its still turning even with the belt connected when i try to loosen the bolts here is the trick. Use a long screwdriver to pry between 2 of the bolts to hold the pulley ...

...i do to get new belt on FOR THE 3.0L ENGINE IF YOU REPLACE AC BELT LOOSEN TOP IDLER PULLEY CENTER BOLT. IF YOU REPLACING ALTERNATOR AND WATER PUMP BELT LOOSEN ALTERNATOR ADJUSTMENT BOLT AND PIVOT ...

...steering pump pulley to remove the belt? Thanks! I loosened the lock nut and loosened the adjusting bolt for the power steering pump pulley. It's not loosening the pulley to remove the belt. Loosen ...

...on a 86 Chevy caprice? The belt is tensioned by the pump itself. You need to loosen the pump bolts and it will slide inward to remove the belt. Pry outward on the pump when new belt is ...