Questions & Answers for: bobbin winder viking 1

...bobbin winder wont release my bobbin. This is the second time this has happened with the same bobbin, and I got it off the first time by gently manipulating the bobbin. It was full of thread so I ...

Bobbin Winder won't release My Viking Rose has a bobbin winder that wont release the bobbin. How can I get it to release? i have a husqvarna rose, i has the same problem when i started using my ...

...the bobbin. The bobbins stick when you have too much tension on the thread or wind too quickly. They will actually squeeze down on the bobbin winder post. Removing thread generally solves the

...bobbin on the winder and won't move the sewing machine up and down. It only winds the bobbin. The black plastic ring must be put back on with it oriented correctly. It can be a bit tricky, but ...

...bobbin winder pin has a spring which holds the bobbin nice and snug while winding. Husqvarna 6020 takes specific bobbins which will fit properly on the bobbin winder pin and will also fit accurately ...

...bobbin winder won't disengage. when you press the pedal down the needle doesn't move but you can hear the bobbin spinning but when you put a bobbin on the bobbin winder it doesn't move at all. Any ...

viking 6430 bobbin winder post won't pop out if the bobbin winder spindle won't move at all, it could be damaged, it would be a good idea to have the machine checked.

...bobbin winder If you mean the bobbin winder mechanism where the bobbin slips on to the spindle is loose, the pin that holds it in place has come out. It's an easy fix but requires that all the covers ...

bobbin is over-winding, the winder leaver needs to be rotated so that the section pointing towards the bobbin is closer. This can be done by gently rotating the winding leaver by hand, remember gently

Bobbin Winder won't turn off! I have a Viking #1 - an old machine that works wonderfully - until just now when I wound a bobbin, couldn't get it off and have to use a pair of plyers to gently pull it ...