Questions & Answers for: bobbin wind wont turn brother

and i think I do, but the bobbin still wont wind. HELP When you put the bobbin on the top spool, did you move the bobbin spool to the right? It will only work if the bobbin spool is moved to the right

...wind? The bobbin winder tire may have degraded so the motor is not reaching that bobbin winder shaft. Replace the bobbin winder tire and you may be set! (That was my machine's problem) Sewing Parts ...

...wont move up and down. Just moved and not sure it it was dropped or anything. dont know what to look for in fixing it myself. Check the settings for bobbin winding to be sure they are not

...is that the clucth in the side wheel is engaged. If you disengage the clutch to wind a bobbin, ensure that you engage it again to start sewing. Hope this helps, otherwise it might be serviceman

...wont turn, and I think there is thread stuck under where the bobbin winds - how do I get in there? if the needle broke into where the bobbin area isyou may have to try pulling the fabric out of ...

...up and down? If yes, Make sure your feed dogs are up... If no, make sure your bobbin wind spindle is disengaged. If it is, then it could be more serious and would need to see the doctor Machine ...

...wind the bobbin on this machine. I recently pulled it out to sew again and now the machine wont wind thread onto the bobbin. The machine runs like its loading the bobbin but the dowel wont turn. make ...

...wind a bobbin and didn't get it rotated back into position tight? I agree with George this is most likely the problem This happened to me when my thread tails were too short and thread got stuck down ...