Question about 3101 Mechanical Sewing Machine
thread clogs up bobbin and knots up thread on back side of fabric immediately when starting to sew thread knots up and clogs up bobbib hi there, well, common problem when you didn't acquired right set
Question about LS-2125 Mechanical Sewing Machine
...left and then placed flat in the bobbin case). Usually if the thread bunches underneath your fabric it means that the TOP thread is threaded incorrectly. Try re-threading the upper thread. Good
...bobbin thread keeps coming to the top of my fabric during embroidering on my Singer Futura CE350, I've tried bobbin embroidery thread, regular embroidery thread and clear nylon thread, I've tried ...
Question about LB6800PRW Mechanical Sewing Machine
thread clog in bobbin case but I took out and cannot fine. How do I take apart to find thread bog? you might clean under the needle plate for lintand use a can of air in and around the bobbin area for
Question about LB6800PRW Mechanical Sewing Machine
...bobbin thread clog up and i need to find out how to thread machine right try using a new needle try a different bobbin just incase there is something wrong with the that one. make sure the bobbin ...
Question about Sew Precise Mechanical Sewing Machine
...the bobbin is turned the correct way in the bobbin case 4. make sure the thread has not come off the thread take up lever 5. Clean under the needle plate & in the bobbin area for lint or ...
...a poor quality thread that frays. The other reason is the tension spring on the bobbin is too tight or it is rough, causing damage to the thread. Try quality thread and your problem should go
...to be equal to the top tension. This is an approximate setting. You are attempting to make it equal the top tension. If there are still problems you may replace the bobbin thread with quality
Question about LB6800PRW Mechanical Sewing Machine
...before it clogs up again. i cleaned it and removed dust. still doesnt work. i maybe putting bobbin case in wrong coz it doesnt freely let the thread go up Check for the needle installed ...
Question about LB6800PRW Mechanical Sewing Machine
...bobbin area is tangling up the top thread. the top thread never breaks it just clogs up in the bobbin compartment can you help? Be sure that when you thread the top thread, ALWAYS RAISE the presser ...
Usually answered in minutes!
760 Questions
764 Questions
564 Questions
565 Questions
372 Questions