...bobbin holder is catching on something. I've cleaned out all the fluff from underneath the bobbin holder but that did not make a difference. thank you ever tried adjusting the thread tension control? ...
bobbin holder,adjust the stitch length longer,and loosen the tension, other wise if you want to put it through the bobbin holder you have to loosen the tension screw on the bobbin holder, and then you
Question about XL-5500 Mechanical Sewing Machine
...inserted backwards in the "bobbin holder". When installed correctly, There is some resistance when you pull on the thread, but the bobbin will spin without trying to pop out of the "bobbin
...on the bobbin holder. When the bobbin is correctly installed, pulling on the thread should meet with slight resistance, and the bobbin should spin without trying to jump out of the bobbin
the bobbin tension and that the thread is tight around the bobbin. Make sure that the bobbin is in the right way around - the bobbin thread should double back on itself coming out of the bobbin holder
Question about CS6000i Computerized Sewing Machine
the bobbin tension and that the thread is tight around the bobbin. Make sure that the bobbin is in the right way around - the bobbin thread should double back on itself coming out of the bobbin holder
Question about Drop-In Bobbin 16231 Mechanical Sewing Machine
bobbin holder is too high to close cover over it try a different bobbin, make sure the bobbin is seated correctly in bobbin case,,take a can of air & use it on the bobbin case area,,also
Question about Drop-In Bobbin 16231 Mechanical Sewing Machine
...bobbin holder in there correctly to get the machine to sew properly. I HAVE TRIED OVER AND OVER IN DIFFERENT WAYS TO GET THE BOBBIN HOLDER IN THE MACHINE PROPERLY While I know it can only go in 1 of ...
Question about Drop-In Bobbin 16231 Mechanical Sewing Machine
...bobbin holder and cleaned it, as well as cleaned the lint from underneath,replaced bobbin holder and bobbin, changed the needle, and rethreaded the machine. It still does the same thing. I would find ...
Question about Drop-In Bobbin 16231 Mechanical Sewing Machine
.... AND NEVER SEEM TO KNOW HOW TO PUT IN A PHOTO OF THE PROBLEM EITHER . IF THE BOBBIN FITS INTO A BOBBIN HOLDER THERE IS A SMALL SCREW THAT WILL ADJUST THE LOWER TENSION AS IT COMES OUT OF THE HOLDER
Usually answered in minutes!
760 Questions
764 Questions
564 Questions
565 Questions
372 Questions