Bobbin case....... I have a problem with the bobbin case falling out while sewing. The latch levers screws are completely tight, but the levers still are loose and won't hold the bobbin case. Can you ...
Question about LS-2125 Mechanical Sewing Machine
...lever of the bobbin case open as you insert it into the shuttle. If there is an arm on the bobbin case, it should be pointing up toward the machine. When the bobbin case clicks into place, it should ...
...lever on the back of the bobbin case and hold it open as you insert the case into the shuttle; arm on the case pointing up. You may have to turn a bit to the left or right - it will click when in ...
...lever that opens when you pull the bobbin out to add the thread, then when you put the bobbin back in the case, you lock that lever down and make sure it fits correctly into the sewing machine and is ...
Question about CS-8072 Computerized Sewing Machine
...brother sewing machince is not sewing and under the materal the thread is tangle all up try changing the needle try a different bobbin make sure the bobbin is wound correctly and not over wound make ...
Question about CS-8072 Computerized Sewing Machine
...fell through hole and went down inside the machine behind bobbin case how do u get it out you should be able to take the bobbin case out, gently hold the machine upside down, and the needle should ...
Question about CS-8072 Computerized Sewing Machine
bobbin area but in the thread take up lever which has thread jammed around it Cut the jammed thread away, carefully. It may only need the thread path cleaned of all loose thread bits after you cut off
Question about CS-8072 Computerized Sewing Machine
...lever. Open the shuttle cover behind the extension table on the the front of the machine and remove the bobbin case by pulling its latch towards you and pulling it out of the shuttle race. (fig A). ...
...brother sewing machine LS2400 The reverse lever is not working. Its loose, meaning that i can't use the sewing machine. When i open the machine its like a metall pice is missing. What should i do? ...
Question about CS-8072 Computerized Sewing Machine
...back in nicely. Then put the bobbin and bobbin case back in by pulling up the small lever on bobbin case and putting it back into the large 'metal bits'. If seated properly, you will hear a
Usually answered in minutes!
760 Questions
764 Questions
564 Questions
565 Questions
372 Questions
