...Bobbin Case on Singer 4830 I have a Singer 4830 and it sews fine. However, when I sew, there is always a loud clicking noise which I think is caused by my bobbin case - I think it is loose. It has ...
Question about Inspiration 4210 Mechanical Sewing Machine
...bobbin case on my Singer Inspiration 4210 sewing machine keeps popping up in the back causing my thread to bunch up underneath. I cleaned the bobbin case, but now it won't sew at all; the case keeps ...
Question about CE-100 Futura Computerized Sewing Machine
bobbin case, a bobbin that is would properly, or when you're getting to the end of the bobbin's thread and the thread is loosely would on the bobbin at that point. You're best bet is probably to buy a
...bobbin case, refilling bobbin, changing needle, adjusting top tension Check for correct bottom thread tension. It's provided by a flat spring on the bobbin holder. When the bobbin is correctly ...
Question about SINGER 7470 Sewing Machine
...bobbin case keeps unseating and I can't get back in properly. I am using singer bobbins and good quality thread have you cleaned the bobbin area & under the needle plate area for lint & ...
...bobbin case wobbley. bobbin case seems loose. also thread sometimes bunches into little ball. looks kind of frayed. try changing the needlethe bobbin case may need to be replaced or the hook and hook ...
Question about 7422
...bobbin case fits in the machine? particulary the lower right clip arm and the upper left metal foot looking part? The bobbin case is not secure so when i start to sew t is there a picture of how the ...
bobbin case for 4423 singer keeps coming loose it would be a good idea to have the sewing machine checked to see why the bobbin case is loose. here is a link for parts for the sewing machine ...
Question about Shark 60 - 384
...bobbin case the needle initially wouldn't pick up bobbin thread. Now that it does pick it up the thread bunches under the model 28/08 built in 1982 Top tension too loose causes looping under, unless ...
Question about Shark 60 - 384
...bobbin case in, but when I put bobbin case and bobbin in machine it doesn't catch bobbin thread. Is this still timing Removed bottom of machine and fixed timing by adjusting wheel. when I spin needle ...
Usually answered in minutes!
760 Questions
764 Questions
564 Questions
565 Questions
372 Questions