...Brother CS6000i Computer sewing machine. I was sewing today and I got a jam all of a sudden. I turned off machine and unthreaded it. While getting the bobbin out I noticed that the bobbin holder was ...
Question about CS6000i Computerized Sewing Machine
...I do it. I'm working with a 1/4 inch seam on doll clothes. What am I doing wrong? I'm working on a new Brother cs6000i machine. adjust your tension, check your bobbin if it is in her right
Question about CS6000i Computerized Sewing Machine
...bobbin thread is not drawing up on my brother sewing machine cs6000i, could it be y bobbin case If the thread is being trapped in the bobbin area, yes, it could be the bobbin case. If the thread goes ...
Question about CS6000i Computerized Sewing Machine
...bobbin thread is not drawing up on my brother sewing machine cs6000i, how do I adjust the tension for the Bobbin thread? Yes its the tension, however it can be tricky, and you really should have some ...
Question about CS6000i Computerized Sewing Machine
...bobbin winder on my Brother CS6000 won't work, as I opened the machine the tire was laid on the bottom of the machine. I understand that I have to replace the tire but I don't know ...
Question about CS6000i Computerized Sewing Machine
...bobbin case that slides into the metal case is missing. What is the parts number and where can I get a replacement? (FAST) Hi, check this site out : ...
...tension on my Bro. cs6000i is too loose. The bobbin thread is showing on the top, and the bobbin side of the fabric is very loose Sound like your top thread tension is loose try increase the
Question about CS-6000i CS6000i 60-Stitch Computerized Sewing Machine with Wide Table
cs6000i the needle hits the bobbin case put nicks in case and then thread snags in the bad area If you are talking about the bobbin case (housing), it may be inserted incorrectly. Remove it and put it
Question about CS6000i Computerized Sewing Machine
bobbin case stuck for my cs6000i bother sewing machine during sewing heard sume thing rong stoped and found the bobbin case is pupped up and stucked there can not get it out how to get it out? https:/
Usually answered in minutes!
760 Questions
764 Questions
564 Questions
565 Questions
372 Questions