Question about D52W19 52" Rear Projection Television
...BNC connector, there are coaxial couplers that require no soldering (they screw on), however these couplers may or may not work, depending on where the break is and how bad the coaxial cable was ...
...your AM/FM base band. also the BNC antenna connector on the inside is notorious for breaking away from the board, nothing a little solder cant handle. Also make sure your local freq's are not ...
Question about Pro-97 Handheld Scanner
...BNC connector to the sub, which part of the connector was pulled out (FROM MY CHILD PUSHING ON THE WIRE) I opened up the sub to see how it was attached and somehow the red wire on the circuit board ...
...BNC antenna connector on my pro-34 scanner radio broke off inside at the solder connection between the receptacle center pin and the circuit board. so my son desoldered it and now i would like to ...
...replacing the connector. If it's the ant/cable input then its more likely to be a F-connector. F-connectors are threaded, BNC have two locking posts opposite each other on the sides of the
Question about Pro-97 Handheld Scanner
...BNC or rga connectors? It depends on the cable you are using. If you are using a simple composite video cable, the yellow is video, while the red and black are the two audio channels. If it is a ...
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions
