Questions & Answers for: bmw z3 seat removal

Question about 1999 318 ti

2 Answers

...z3. The air bag was disconnected while I was adjusting the window. After I finished the job and reinstalled the airbag, door panel, etc. The air bag light stays on. Any suggestions? Thanks more than ...

Ad

Question about 1997 Z3 Roadster

1 Answer

Drivers side seat will not adjust in the up and down position. When activated, it appears that solenoid is triggered, but seat will not raise or lower. Front and back adjustments are fine. I had the ...

Ad

Question about 1998 Z3 Roadster

1 Answer

seat motor My passenger seat worked two days ago and now there is nothing when the switch is moved. Any ideas... could it be a fuse issue, if so where would I look for that? This car is new to me. ...

Question about 1997 Z3 Roadster

1 Answer

bmw z3 has no electrics, all dead believe may be caused by heavy rain in a fuse some where ? nothing was left on, have no central locking,no lights on dash nothing might be water inside the car leaked

...BMW Z3 electric switch is broken need help to replace seats on BMW Z3 1998 There are 4 bolts holding all car seats if you can get at least 2 off than you should be alright as long as you can squees a ...

bmw z3 passenger seat goes forward backwards but bmw z3 passenger switch for the seat goes forward backwards but not up down what is the problem? It can also be theseat motor since there is seperate ...

z3 w reg 2.0 drivers seat wont go up and down seat goes back and forth but not up and down. its stuck up wich means i can drive car with roof up as 6,1 tall . when operate switch it clicks and there ...

...z3 It's never a great idea to dis connect any safety feature on a vehicle. But should you wish to do so here are two possible options. BMW may have a key operated switch (usually ignition) to disarm ...

...BMW Z3? Installing a water pump. Courtesy of Dana Corporation. Loosen and remove the bolts in a crisscross pattern from the center outward. Insert a rag into the block opening and scrape off any ...

Question about 1997 Z3 Roadster

1 Answer

drivers seat motor wont go back or forward but will go up and down maybe something jammed in the rails or damaged motor. Up & down is ok because it has seperate motor. Easy to remove seat and have

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...