Questions & Answers for: bmw z3 roadster doors

...BMW Z3 M fit a 1999 BMW Z3 2.8 ltr roadster? Hi I have been offered OEM BMW Z3 wheels from an M model, will they fit a 2.8ltr 1999 Z3 Roadster? yes they will you just may need to use a wheel spacer I ...

Nearside wing mirror on 1998 Z3 The mirror is working loose, how do I tighten it? I'm not aware of it having been hit at all and there are no marks on it. It is currently quite loose hanging on to the

...BMW Z3 2.8l LOCATED??? Depending on which airbag sensor your after. There are 4 crash sensors on these. 2 in the doors for the side airbags, and the other 2 can be located underneath the bonnet. The ...

I locked my wifes Z3 with the key when I washed it and now the passenger door will not open with the remote or the door handle,have I put the system out of sinc i think so. disconnect battery first, ...

The extension of the drivers side armrest which holds the mirror adjusting switch is broken. The material is plastic and is held to the door with a screw. Can this part be found? this is a dealer only

...BMW Z3 Roadster Driver Side Door Handle sticks on occasion. It will open from the inside but not the outside. Then sometimes it works fine. Tried to lubricate the door handle from inside the door ...

...bmw z3 does not seem to work this morning. Both door locks accept the key with force although do not seem to turn - Stiff, akward movement within the lock. The boot lock still turns although when it ...

door light won't go out Check for a short in the wiring that goes from the door connection or a faulty switch on the door or broken insulation around the door contacts. Remove door contacts one at

...BMW Z3 are locked. I cannot get in to the car both the key and remote have no effect. How do I get into my car? e60 525i that I just brought and it has the same problem, the owners manual suggests ...

door closes and bell keeps on dinging with no key in ignition , play with switch in door and it stops then starts again . Bad switch or short ? can I remove fuse to stop this? If so which fuze in box ...