Questions & Answers for: blu ray player hold electrical

player to hold it in place or the battery charging light will not come so instead of it actually using electricity to play it uses the battery and then when that runs out it stops. Is there anywhere i

...hold it and wrap electrical tape to the cord (like a "cast") to keep that spot in the cord from bending again. It works but I have to check to be sure the light is on when recharging (if not - wiggle ...

...player where can I find a new battery it does not hold a charge anymore can you help me Hi, To my knowledge, a TruTech PVS12701 uses a Lithium-Ion 7.4v 2500mAh battery. There are no exact replacement ...

player works only when pluged into electrical outlet. Please advise. Thank you. the battery pack is charging but not holding charge beacause it was not used for a long time as you said.try to recharge

...circuitry to prevent any electric shock***as these appliance and many still can hold alot of electrical charge....then replace caseing carefully making sure they are screwed in tight...and away you ...

...electrical cord plugged in and do not touch capacitors that might hold remaining charge. However, although the disks are mostly standard IDE disks, there might be a software specific to this brand of ...

...hold the disc up to the light and tilt it back and forth you can see if the disc may have small scratches or has some form of dirt (such as finger prints). Again, you can purchase kits that will help ...

...player manually. You can find detailed instructions on how to do this in my tips and tricks section, just click the link provided. You can also browse my profile and tips and tricks for other useful ...

...player is not blue-ray compatible. (This may sound silly but it does happen because people may look at the label correctly and pick a blue-ray disc up by mistake). Rather than make one long post, I ...

...player for 2 years and it was working fine, then one day i tried to turn it on and nothing happened. i checked if the fuse was blown but i appears to be fine. so there is no power either getting to ...