Questions & Answers for: blower motor removal 1997 suburban

blower motor on my 2002 silverado i know where it is but dont know how to go about it 2002 silverado as follows : 1. if equipped , remove the sound insulator panel , remove the blower motor insulating

...blower motor is drawing to much current, this happens as they wear out, replace the blower motor aNd all will be well in chevy land. I'm havin a similar problem on my 98 Chev. Suburban C1500 that ...

...blower motor and if equipped, remove the underdash courtesy lamp. Remove the bolt from the right side lower instrument panel support. Remove the blower cover and the cooling tube. Unfasten the flange ...

...blower motor. Under the dash on the passenger side .. you will need a 5.5 mm socket or a 7/32 " to remove the screws . They usually have a plastic/ rubber cover on them that are a pain to remove but ...

blower motor replacement Disconnect the negative battery cable. Disconnect the blower motor lead connector from the wiring harness connector. Remove the blower motor cooling tube from the blower motor

...blower motor in 1989 Chevy Suburban? Disconnect the negative battery cable. Disconnect the blower motor lead connector from the wiring harness connector. Remove the blower motor cooling tube from the ...

...blower motor? the blower motor is mounted under the passenger side of dash. there are two types of blower motors in this truck, one version the blower motor has no screws that hold in place, you just ...

...setting it completely shuts down Check the blower motor resistor. Usually on under the passenger side dash next to the blower motor. It will have two bolts (most likely 1/4) in and wires going to

where is the blower motor resistor located on a 1997 gmc suburban just need location by the blower motor

...for it to work. it may be either a bad connection at the resistor block or the blower motor. check this out. if going over a bump starts the motor it may be a bad blower motor that needs