Questions & Answers for: blower central unit shut heater

...a Intertherm FEH-015HA Central Electric Furnace If your blower will not shut off from the thermostat, you either have a bad thermostat or your red and green thermostat wires are exposed to each

...blower fan on my ruud ac/heater central unit wont shut off. it has a 62-24084-82 furnace control board Try cycling the switch at the furnace to reset the blower board. If this doesn't work remove the ...

...Central Heat & Air Unit. Have no manuals for this. Need to clean cooling coils inside house. Unit is with the heater fan blower unit. Can't see a model #. Outside Unit is model BTD730A100A00 date ...

heater not coming on. Replace the element. IF YOU HAVE POWER TO THE UNIT CHECK THE LEADS COMMING IN 238 AC VOLTS. IF THIS IS WHAT THE UNIT IS RATED FOR SEE IF YOU HAVE 238 VOLTS AT THE ELEMENTS, IF SO

...blower runs constantly (does not shut off automatically) with no heat. Emergency heat will come on by itself when cold enough while blower is running. Still will not shut off automatically when ...

changed the sequencers and the blower pauses on startup and also the blower shuts off before the last 2 elements cut off.Blower kicks back on for a few seconds then shuts off after power to elements ...

unit is a stuck blower relay. Once the unit is reached temp and the heat elements stop the blower is to shut down when unit cooled. In your case the switchis stuck resulting in continuous fan. Here is

unit? It may be one of 2 elements not working, a thermostat problem, scale build up in tank, to name a few possibilities. You'll need to shut off power to water heater before doing anything to it, and

...heater before it cooled down and now wont start what could be the problem? It should automatically restart.....BUT what happened is that when you unplugged it, you cut off the blower at the same time ...

...unit. It seems that the blower keeps running even after heat is at set temperature. Any thoughts? working as it should Yes it's normal for blower to run for 1 to 2 mins after heating element shuts ...