it was working - Please replace it anyway !!! It's only $14.00 for the part. Also the other part needing replaced was the Flasher Relay - $34.00 !! NOONE not even JEEP could figure out this problem !!
blinkers don't work but hazzards still work???? THER IS TWO FLASHERS IN YOUR TRUCK,ONE FOR THE HAZZARD AND ONE FOR THE TURN SIGALS.YOU NEED A NEW TURN SIGNAL FLASHER,CHECK YOUR FUSES FIRST TO VERIFY.
my left blinker does not work..there is no clicking sound does the light comes on when applying turn signal? or does any light at back or front of vehicle stays on? possible a light bulb is burned out
2000 Jeep Grand Cherokee, I had blinkers and flashers no brake lights, and after checking the bulbs in the light itself I dont have blinkers or flashers at all Just no turn signals in the back now? ...
Left turn signal stopped working. Checked bulbs. brake light, emergency blinker and back-up lights all work. Check for preoper ground on bulb housing, clean any dirt or corrotion.
when i use the left blinker my hazards will start flashing. but not when i use the right blinker. and periodicly my left blinker will work for short periods of time That's consistent with a signal
No blinker or brake lights on a 2000 jeep cherokee Blinkers and brake lights don't work but the hazard lights do work Switch unit or fuse browned
Question about 2000 Cherokee
blinkers to stop working on a 2000 jeep cherokee sport? the hazards work fine Interesting, these are on the same circuit. 1) Click the hazards on and off a few times to exercise the switch. 2) Replace
how come blinkers wont work- 4 way flashers do? Bad flasher clean the connections at the bulbs ,, most likely it is the steering column,,, replace the switch
Question about 2000 Grand Cherokee
...when key is on there is nothing working ie lights blinkers dome dash all is dead is there a wire that could be broken See if the positive battery cable is corroded or even has a good
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions