Questions & Answers for: bleeding valve cooling system 2002

it helped some bbut not completely. Do I need to bleed it and if so, where is the bleed valve? thanks The bleed valve is located on the back side of the back plate of the axle. Try bleeding the system

...valve ist not the cause. usualy you have a leak in your cooling system, either somwhere in the cooler, the pipe, the hoses, which could be easy detected. or you have a leak into the cylinders. ...

...bleeding the air out of the cooling system. At the front of the engine, on top, should be a bleed valve. It's small, and looks similar to a grease fitting. This is the highest point in the cooling ...

...valve, add coolant till no more bubbles come out of bleeder close bleed, top of resivor replace cap and your done. There is a bleeder screw on the top side, front of the motor. The motor has to be ...

valve and allow the cooling system to purge the air out of the system you can tell when the air is out of the system when a steady stream of coolant starts to flow out of the bleed valve, if theres no

bleeding the cooling system look at your top radiator hose is there a small bleed valve at the top of the thermostat housing when the upper hose attaches to? If so loosen the bleed valve and allow the

...valve. Does the cooling fan come on ? Notice: When adding coolant, it is important that you use GM Goodwrench DEX-COOL™ coolant. If coolant other than DEX-COOL™ is added to the system, the engine ...

being old and worn out the best bet is just replace the hose and bleed the cooling system. Just in case heres the link to bleeding a cooling system. www.youtube.com/watch?v=zUpXgAJ1gjU Hope this helps

cooling system after new water pump . 2002 chev cavalier. What size motor? 1. Fill the cooling system 2.slowly add a mixture of 50/50 DEXCOOL and clean and drinkable water.Approximate fluid capacities

valve on a 2002 ford explorer? ive replaced everything to do with the cooling system. how do you properly bleed the cooling system on a 2002 exploer 4.0? It would be at the top of the engine if it has