running hot changed the thermostat changed the water pump...still runs hot no heat Check the Tension on the Belt. If it is not tight enough or you need a New Tensioner for the Belt, It will run hot. ...
cooling system it will cause the same issue. there is usually a bleeder screw on the tube coming up from the water pump. more than likely these two are not related. You may have a bad thermostat or if
...your cooling system, either somwhere in the cooler, the pipe, the hoses, which could be easy detected. or you have a leak into the cylinders. dedection difficult. if you cant find it, see a
bleeding air from the cooling system is to use a floor jack and raise the front of the car as high as poss, then fill the coolant recovery tank full and run the engine until it just starts to overheat
...cooling system with the proper 50⁄50 mix of DEX-COOL coolant and distilled water. Bleed the cooling system. It is easier to remove the rad than dealing with your air ...
...cooling system inspected. if you recently changed a part that caused you to break an antifreeze line and had to add more antifreeze and you did not bleed the system properly than you could possibly ...
Question about 1996 Cavalier
...1996 chevy cavalier, the thermostat was good.Then we drove it about 15 miles and it overheated .The problem then was that we forgot to bleed the system.We had it bled and was working good,until abt 3 ...
...cooling system but, there are two bleed valves. (these are the most logical locations)One is just above the water pump, and the other is on the thermostat housing. They are really small, and due to ...
...text, just google and youtube yourself through it. Search for things like "Bleeding the cooling system" and you will find a few different ways you can do this. Just use caution when the water is
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions
