Questions & Answers for: bleed clutch hyundai accent

...clutch but is seperaterated inside if fluid low? top up and bleed the slave cyl however if fluid low indicates a leak ? possibly slave cyl? if no loss of fluid ? then prob may be fault in the master ...

Ad

Question about 2008 Accent

2 Answers

CLUTCH i HAVE A HYUNDAI N REG ACCENT 15,000 MILES, THE CLUTCH IS NOT SLIPPING BUT I HAVE TO PUMP THE PEDAL TO GET IT TOO WORK , DOES IT NEED BLEEDING OR A NEW CLUTCH, HAVEN'T DRIVEN IT FOR TWO YEAR ...

Ad

Question about Motor 1998 Accent

3 Answers

...bleed the clutch.im am sure this will solve you problem I had the exact thing happening to my 98 accent, There is a pedal adjustment under the dash. the pedal has a clevis that goes to the cylinder ...

...clutch fluid is empty. When refilling, how do I bleed it and where would the most possible place for a leak be located? leak is usually at the slave cylinder. If leaking, replace the slave. Make sure ...

...system.you need to check clutch master cylinder for low brake fluid if so you need locate leak fix it.then refill clutch master cylinder have a friend around to help bleed the

Question about Motor 2004 Accent

1 Answer

...hyundai accent. In cold almost impossible to shift thru all gears. Sometimes does ok by putting in neutral, letting clutch out then with clutch in shifting into next gear. Ok to use another gear oil ...

...loose at every time running i have changed clutch plate and adjusted the pedal but still it shows problem Did you bleed the air out it's just like the brake sys it has a bleed valve to get the air ...

you need to bleed the master cyl. first, then remove the pipe on top of slave, and bleed it till it spits out. eventually the clutch will be restored. I suggest you fit new master and slave kit first

...bleed the clutch on a 2002 hyundai accent its the same process as bleeding brakes- except you pump the clutch pedal and loosen the clutch slave cylinder located by the front motor mount instead of a ...

...clutch in a Hyundai accent 2000 model You have a hydraulic clutch and there is no adjustment. If the clutch is spongie, try bleeding the clutch at the slave cylinder. Other than that, it may need ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...