...1989 and the clutch got stuck when i pressed it down and does not come back up. if hydraulic, maybe slave cylinder, or air in line bleeds like brakes Have you checked www.autozone.com repair ...
...clutch you bleed it by having someone in the cab. have them push the clutch in and hold it. open the bleed screw til you have a steady stream with no air. reapeat the proccess . it's the same ...
...clutch and throwout bearing now will not go into gear i bleed the throwout bearing thing it didn t have aenough pressure when the pedel is out make a whining noise and won t go into gear versalize ...
...YOU WILL END UP REPLACING THE CLUTCH MASTER CYL BUT THIS TIME YOU NEED TO GAIN ACCESS TO THE SLAVE CYL AND APPLY PRESSURE TO IT HOLDING IT BACK WHILE SOMEONE PUMPS THE PEDAL AND YOU BLEED IT ...
...bleed technique, or replace the clutch master cylinder. Bleeding a Ranger clutch system takes time and patience. One small mistake / loss of patience / or shortcut, and you'll have to start all ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions
