Questions & Answers for: bleed brakes 2002 silverado

...bleed the brake system starting at the master cylinder FIRST. You also want to make sure that you do not have any more leaks or open lines. Do not turn the car on until the brakes are bled or the air ...

Ad

Question about 2002 Silverado 2500HD

2 Answers

brakes pedal feels spongey while applying brakes on rough road or bumpy roads Bleed brakes, add new brake fluid. Either you need to bleed the system or else you need to check your master cylinder...

Ad

Question about 2002 Silverado 1500

2 Answers

bleed the brakes in the proper order? RR LR RF LF. check rubber lines for deterioration or BULGING when you apply brakes. You need to bring it to a dealer so they can bleed the lines with a scan tool.

Question about 2002 Silverado 2500HD

3 Answers

...brakes where changed they weren't bled; this would cause a soft brake pedal. Most common reason for a soft pedal is a bad master cylinder. Once they become faulty they fail to provide the pressure ...

Question about 2002 Silverado 1500

1 Answer

...bleed the brakes on a 2002 chevy silverado? Tried the old fashion way and no go you have to bleed them all, starting at the passenger side rear,, then the drivers rear, up to the passenger front, and ...

Question about 2002 Silverado 1500

1 Answer

...brakes to bleed can't get the brakes system to bleed 2002 chevy silverado 1500 4x4. Do you have someone slowly pressing on brakepedal,as you open the bleeder valve & close beforethe pedal ...

brake pedal goes down normal then gets hard like there is air in line even after bleeding lines Usually when there is air in the brake lines, the pedal goes to the floor. If it is very difficult to ...

...The main issue is bleeding the air out of the booster. It can be difficult. You will also need to bleed your brakes completely afterward. GMs are notorious for having the hydro boosters die on

Question about 2002 Silverado 2500HD

1 Answer

bleed brakes bleeder after repairing brakes and bleeding brakes still seem close to floor I do believe you have to put your truck on a scanner to bleed the brakes properly. I have done it a few times ...

Question about 2002 Road Star Silverado

1 Answer

...bleed the brakes. Check for leaks, particularly around the piston. I think that there was a ring of dirt built up around the piston and when you pushed the piston in the dirt rolled or ripped the ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...