Questions & Answers for: black smudge left side paper

...black toner smudge along the right side of the paper... I've recently replaced the toner cartridge and followed the instructions regarding cleaning the inside bits... any advice? Hi, try to pull out ...

...black smudge. This problem does not occur on the right side with the assembly traveling from right to left. Any thoughts or suggestions would be greatly appreciated. well if u have a straight paper - ...

Black smudge marks along left side edge of paper. I installed a new cartridge and now I am getting these black marks along the left side edge of the page. I ran a few copies and now they look darker ...

...left hand side black and white and color printout is smudged - about 5-6 cm (1.5 - 2.5 inch). The rest of the page prints properly - any help would be greatly appreciated. change ink cartdidge then ...

...of paper Printer is smudging color and black ink on the left side of 11x17 paper only. What can we do? Hello sir; Pull out transfer belt unit replace belt clean blade. it should take care yor

...and black ink on the left side of 11x17 paper only. What can we do? The picture is of a black and white Canon ImageRUNNER 400, but you speak of "color and black ink". What model unit is this

...black smudge pattern on left side of page When my Canon i560 prints it creates a black smudge pattern down the left side of the page on each of the pages printed. Try running its Clean Cartridges ...

...black stripe running down left side of paper when sending fax or making a copy. We changed the cartridge but that wasn't the problem. Open the top of the fax where your documents go in. There will be ...

...black and yellow color? Is it a smudge? When I print, the pages are smudged with ink. What should I do? Description: - If smudged stains appear at the top center of the printed page: Make sure the ...

...Black smudges along left side of paper. This happens both when I copy something, and when I print something directly from the computer. How do I clean it? this is possibly a problem in the fuseing ...