Question about P46812BL 46" Rear Projection Television
...PICTURE is really bad. I have adjusted the colors on the back of the TV to show the best. And it looks fine. But after I turn it off. Then if looses the setting's. Then I have to adjust it again. ...
Question about P46924 46" Rear Projection Television
best picture. But when I turn off the TV it seems to RESET and I have to do it all over again. I do not want to have to do this each time I want to wathc the TV. Please advise on what I can do so save
...picture circuit if there is one or the sync sepaqrator circuit has a problem. most likely a bad capacitor or a bad diode. This is a solid state set and there are no user replaceable parts inside them ...
...picture tube and the liquid dripped down onto the switches and corroded them, or one is stuck closed or the remote sensor is bad. The best way to test this would be to replace the entire switch panel ...
...picture tube. I have found that the best RCA parts distributor is Union Electronics at 1-800-648-6657. The picture tubes in projection sets are very fragile and dangerous to handle. The new picture ...
picture I have a rca projection tv model 46725sk that just stopped playing. jerel,Please provide accurate info for best solution = on back of set =Model # , service # , chassis # , Mo / Yr built......
picture coming on then goes out black have a 52 '' rca hdtv having problems When the set goes off, does it die completly or do you still have audio through the TV speakers? If the whole set goes dead,
...best viewed. no channels are coming up on vid 1 at this time, it is a black screen with no sound. there should be 3 sets of video rca jacks on tv or receiver they might have put them on the wrong rca ...
...picture with printing the top is reddish and under it is same printing in green. On my satellite menue the info screen lines are no longer straight they appear bowed at the top and reddish bottom. ...
Question about D52W20 52" Rear Projection HDTV-Ready Television
picture,no sound,nothing?? DM power board have some dead capacitors.Some capacitors bulge up,best indicatoin it dead,some u must used a multimeter to test.U know how to use a soldering iron and solder
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions