Question about M130000 ''i'' Dual Cyclonic Upright Vacuum Cleaner Vacuum
...belt wont move - so the small axle spins and burns into the belt. this can burn the belt and melt it and can also stress the motor which is the real pricey repair and not worth it. pop the roller out ...
Question about SteamVac Carpet/Upholstery Deep Cleaner Vacuum
my brushes wont spin and i dont know why Belt has probably broken Your belt has broken and therefore the brush isn't spinning. You can find any vacuum belt at www.vacbelts.com.
...wont spin. Cleaned top filter and brush at the bottom. Belt is fine, Suction seems ok at present. Do I need a new bottom filter? Even thought the belt may look fine the belt still can be worn and ...
Question about 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum
...wont spin ,even though the belt is intact The belt can develop a worn spot. It will be intact but not spin. Replace the belt and make and remove any hair or other garbage from around the ends of the ...
...wont spin, belt is perfect hoover convertible upright U8188900, less than 1 yr old, brush wont spin. Carpet selection on the on/off is in proper position, belt excellant condition, has suction. Is ...
Question about S3765-040 WindTunnel Bagless Canister Vacuum
...wont spin on carpet power nozzle. When it is turned upside down, the brush spins fine, but there is still no suction. I have cleaned out hose, no blockage to be seen. Belt look fine. Suction is there ...
...wont spin one of my waist belt got caught in the brush and now the brush wont spin. i heard a loud clicking when it got in there so i shut it off and pulled the belt out and when i turned it back on ...
Question about Platinum Carpet Cleaner With Maxextract Technology, F8100-900
...wont turn belts not broke Check that the brushes are not jammed up with hair and fluff. Remove the brush from the housing and clean throughly including the bushes/inserts and belt Hope that ...
Question about Platinum Carpet Cleaner With Maxextract Technology, F8100-900
...wont spin Questions & Answers ... www.fixya.com > Forum > Tags ... bissell pro heat pet 2x and my brushes won't turn or operate... check the belt belts ok brushes won't turn/rotate turn dial on ...
Question about Platinum Carpet Cleaner With Maxextract Technology, F8100-900
...WONT SPIN I replaced the broken belt, cleaned out all the dog hair and cleaned the brushes. I found it very hard to get the belt on, it was very tight. Now the brushes wont move at all. I've been ...
Usually answered in minutes!
1,132 Questions
1,137 Questions
870 Questions
836 Questions
