Questions & Answers for: belt tensioner pulley

...BELT TENSIONER (6B209) TO SNAP BACK AS DAMAGE TO DRIVE BELT TENSIONER OR PERSONAL INJURY COULD RESULT. NOTE: Minor cracks in the V-grooved portion of the serpentine drive belt (8620) are considered ...

Ad

...release tension from belt; remove belt; make sure not to forget how the belt is routed; route belt around all pulleys but tensioner; put tension on tensioner pulley; route belt over tensioner ...

Ad

Question about 2002 Escape

2 Answers

belt tensioner 2.0L Zetec with A/C ItemPart NumberDescription 110344Generator pulley 219A216Belt idler pulley 33A733Power steering pump pulley 46C301Drive belt 52E884A/C clutch pulley 66B320Crankshaft

...Belt Tensioner Tool, Or Wrench OR Ratchet, Rotate/Move the Tensioner USING THE AVAILABLE NUT (on the Pulley or Arm Base) OR the OPENING (3/8ths or 1/2 inch square opening) rotating the Tensioner ...

Question about 1997 Continental

1 Answer

belt tensioner to snap back as damage to the drive belt tensioner or personal injury could result. Rotate the drive belt tensioner clockwise with a breaker bar installed in the 3/8 inch square hole in

Question about 2004 Taurus

2 Answers

...belt tensioner pulley 76A312Crankshaft pulley 88A528Coolant pump pulley Component Locations 3.0L (4V) ItemPart NumberDescription 13A733Power steering pump pulley 28620Drive belt 319D784A/C clutch ...

Question about 2003 Explorer

1 Answer

belt tensioner clockwise and remove the drive belt. WARNINGNever suddenly let go of the tensioned idler pulley. The force of the spring pressure suddenly released may damage the idler pulley mechanism

...belt tensioner. It is located below the alternator on the left front side of the engine. The tensioner on the 3.4 liter, 3.5 liter and the 3.9 liter engines will require a 3/8 ratchet to release the ...

belt over the tensioner pulley while you have the auto-tensioner pulley bolt turned clockwise as far as it will go. Make sure that the belt is sitting centered in all the various pulley grooves on the

Question about 1997 Sable

1 Answer

...belt tensioner and... Fig. Fig. 17: ... remove the belt from around one of the pulleys to remove the belt WARNINGUse caution when removing or installing the belt and make sure the tool does not slip ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...