Questions & Answers for: Ford belt tensioner

...BELT TENSIONER (6B209) TO SNAP BACK AS DAMAGE TO DRIVE BELT TENSIONER OR PERSONAL INJURY COULD RESULT. NOTE: Minor cracks in the V-grooved portion of the serpentine drive belt (8620) are considered ...

Ad

...belt tensioner wear indicator marks Fig. Place a wrench on the drive belt tensioner bolt and rotate the assembly clockwise to relieve belt tension Using a 15mm wrench attached to the drive belt ...

Ad

...Belt Tensioner Tool, Or Wrench OR Ratchet, Rotate/Move the Tensioner USING THE AVAILABLE NUT (located on the Tensioner Pulley rotating the Tensioner Pulley/Arm - moving it away from contact with the ...

...belt tensioner on the front of the engine.The tensioner is what keeps tension on the belt and keeps the belt from coming off.The tensioner will have a bolt head in the middle of it that a 15mm socket ...

Question about 1999 Escort

1 Answer

...belt tensioner. Drive belt slack is taken up by the automatic tensioner. NOTE: Movement of the automatic tensioner assembly during engine operation is not a sign of a malfunctioning tensioner. This ...

...belt tensioner. The serpentine belt drive is located on the front of the engine on the passenger side of the engine compartment. The spring-loaded belt tensioner on the 1998 Contour is located ...

Question about 2003 Explorer

1 Answer

belt tensioner clockwise and remove the drive belt. WARNINGNever suddenly let go of the tensioned idler pulley. The force of the spring pressure suddenly released may damage the idler pulley mechanism

Question about 1999 Taurus

2 Answers

...Belt Tensioner Loose or Damaged Belt Tensioner Will Allow Belts To Slip. 6 Inspect Belt Tension Incorrect Belt Tension Will Allow Belts To Slip. 7 Inspect A/C Clutch Pulley/Rim Misaligned A/C Clutch ...

Question about 1999 Taurus

1 Answer

...belt tensioner flange. Rotate the (B) drive belt tensioner (6B209) in a clockwise motion to release belt tension. Raise and support the vehicle. For additional information, refer to Section 100-02 . ...

Question about 1996 Crown Victoria

1 Answer

...belt tensioner to replace the serpentine belt? NO YOU DONT HAVE TO REMOVE BELT TENSIONER.ALL YOU NEED IS A 1/2 BREAKER BAR PLACE BREAKER BAR ADAPTER END INTO 1/2 ADAPTER HOLE IN BELT TENSIONER THEN ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

2000 Ford Focus
2000 Ford Focus

3,749 Questions

1998 Ford Explorer
1998 Ford Explorer

2,998 Questions

2001 Ford Focus
2001 Ford Focus

2,612 Questions

1999 Ford Taurus
1999 Ford Taurus

2,348 Questions

2004 Ford F150
2004 Ford F150

2,636 Questions

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...