Questions & Answers for: belt tensioner

Ad

...belt self tensioner is NOT a dynamic tensioner. After adjustment the tensioner bracket bolts are tightened. The torsion spring is no longer responsible for tensioning the A/C belt. The torsion spring ...

Ad

...BELT TENSIONER (6B209) TO SNAP BACK AS DAMAGE TO DRIVE BELT TENSIONER OR PERSONAL INJURY COULD RESULT. NOTE: Minor cracks in the V-grooved portion of the serpentine drive belt (8620) are considered ...

Ad

...release tension from belt; remove belt; make sure not to forget how the belt is routed; route belt around all pulleys but tensioner; put tension on tensioner pulley; route belt over tensioner ...

Question about 2001 Ram 2500 Truck

1 Answer

...belt tensioner. Drive belts on diesel engines are equipped with a spring loaded automatic belt tensioner. This belt tensioner will be used on all belt configurations, such as with or without air ...

...Belt Tensioner Removal & Installation To Remove: Rotate the accessory drive belt tensioner clockwise. Remove the accessory drive belt. Remove the accessory drive belt tensioner bolts. Remove the ...

...belt auto-tensioner from above the engine. Slowly turn the wrench in the direction shown to release the tension, then remove the drive belt. WARNING This is a hydraulic type auto-tensioner; you must ...

Question about 2003 Explorer

1 Answer

belt tensioner clockwise and remove the drive belt. WARNINGNever suddenly let go of the tensioned idler pulley. The force of the spring pressure suddenly released may damage the idler pulley mechanism

Question about 1996 Caravan

2 Answers

...belt tensioner on a 2000 Chysler Caravan with a 3.0L engine, with a/c. I would appreciation a diagram for properly installing the serpentine belt, and some instructions on how to replace it and the ...

...belt tensioner for the following conditions:Noise If the belt squeals, the tensioner force may be insufficient. Check the belt length gauge, if the length is correct, replace the tensioner.If the ...

Question about 1997 Sable

1 Answer

...belt tensioner and... Fig. Fig. 17: ... remove the belt from around one of the pulleys to remove the belt WARNINGUse caution when removing or installing the belt and make sure the tool does not slip ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

Marvin
Marvin

Level 3 Expert

85020 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

john h

Level 3 Expert

21230 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...