Questions & Answers for: Pontiac Grand Prix belt routing

Ad

Question about 2000 Grand Prix

1 Answer

Driveability The supercharger belt keeps slipping off,what could be the cause? several things come to mind 4 this your belt is old n stretch out ur belt tensior is bad or the pully on supercharger is ...

Ad

Question about 2008 Grand Prix

1 Answer

drive belt routing for 2008 pontiac v6 drive belt routing for 2008 pontiac grandprix v6 there is no sticker on car Did you look in the owners manual?

Ad

...belt routing,in not then draw how the belt is routed before you take it off the car.the parts store may have a routing diagram,if the belt broke then if you know someone with the same type and engine ...

...belt routing diagram. This diagram has the instructions for installing the new serpentine belt around the accessory pulleys. 3 Inspect the front of the engine and locate the automatic belt tensioner. ...

Question about 1999 Grand Prix

2 Answers

belt routing for 3.8 2008grand pre Belt routings by Dayco: http://www.accessdayco.com/ Routing for 2008 GP with 3.8L.... Good Luck! It should be the same for all the 3800 engines like this: ...

Question about 1999 Grand Prix

2 Answers

...belt routing diagram is missing from the car. It a 2006pantiac grand prixx 3.8 This should help. ...

Question about 2004 Grand Prix

1 Answer

beltroutingfor2004grandprix Check this for 3.8L (click image for zoom)... Fig. Serpentine drive belt routing-3.8L (VIN 1) Engine Fig. Serpentine drive belt routing-3.8L (VIN K) Engine Hope helps.

belt routing.Below is the master help link provided to go through belt routing diagram:---Timing belt, drive belt, serpentine belt, accessory belt, fan belt, engine belt routing diagrams for all types

...routing. There is an automatic belt tensioner in the loop. Use an appropriate tool to release the tension on the old belt and remove it from the vehicle. Route the new belt as per the diagram and ...

...routing diagram if not google your car and year asking for belt diagram. Locate tensioner usually turns with wrench ( socket or box end is best) route the belt according to dia. leave tensioner for ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...